FYMC20W health type (at the film) pressure transmitter

FYMC20W health type (at the film) pressure transmitter is in FY-MC20A and FY-MC20B pressure transmitter prototype basis, the isolated patch welding sealing structure and form. Its welding sealing device isolated patch has a variety of different process connection structure form, especially suitable for high temperature, high viscosity, crystalline medium and easily blocked the occasion measuring pressure, also suitable for health, medical situation the pressure measurement.

Typical application:
Food, drink, medicine and health, paper and other health industry

Technical performance:
Clean plane type isolated patch, conforms to the international 3 A health standard
The ceramic capacitors pressure sensor or the proliferation silicon pressure sensor
Range: 0 to 4 KPa ~ 35 MPa
Power supply: 15-36 VDC
Temperature drift: 0.02% FS / ° C
Precision: 0.25%
Shell protection: IP65
Electrical connections: cable type, khodorkovsky tasman joint \ 2088 shell, waterproof box can be chosen
Temperature: electronic circuit board work 40 ~ 85 ℃ in- Sensitive components work 40 ~ 104 ℃ in- Storage temperature-40 ~ 85 ℃; With digital display-25 ~ 65 ℃ (normal operation); -40 ~ 85 ℃ (no damage);
Relative humidity: 0 ~ 95%
Stability: the maximum range range of plus or minus 0.25% / 6 months
Vibration influence: in any axis upward, frequency for 200 Hz, the error is the maximum range range of plus or minus 0.05% / g
Load effect: as long as the input voltage of transmitter than 12 V, in the load without load effect.
Installation position effect: the biggest can produce not more than 0.25 kPa of zero error, but through the calibration eliminate the error, no influence of range; Measuring relative flange turn no effect on the body.